HOW IT WORKS
CONTINUED
Four Solar Panels Connected in Two Strings and Parallel:
1. To start, two solar panels are connected in series by MC4 to form a
group.
2. Two other solar panels are connected in series to form a second
group.
3. Cable B is used to connect the MC4 negative connector of two
groups of solar panels.
4. Connect the MC4 positive connection of two groups of solar panels
with Cable C.
5. Use Cable A to connect the positive and negative terminals of Cable
B and Cable C respectively.
6. Finally, connect the XT60 interface of Cable A to the energy storage
power supply for charging.
IMPORTANT NOTICE
1. To harvest solar energy most eff iciently, try to ensure that the
sun’s rays hit the panel at a 90-degree angle and that the panel is not
shaded.
2. This product cannot come in contact with strong corrosive
substances.
3. During operation, avoid scratching the surface with hard objects.
4. Do not bend this product during transport and/or assembly.
5. This product cannot be used in combination with third-party solar
panels. Equipment failure and damage caused by this reason are not
covered by the company’s commitment to warranty.
6. When using solar panels, the shaded solar cell components will
generate heat, which is the hot spot effect. This effect can severely
damage solar cells. In addition to having a serious impact on
component life, the hot spot effect may burn components or even
cause a f ire. Be sure to adjust the angle and position of the solar
panel in use.
4.
