Figure 5.2.1.1 schematic diagram of left side port
13
5.2.2 Left side port
[1]: FREQ-SW button, For switch frequency.
Press the button more than 5 seconds, 4 lights (HDMI, LINK, OSD, WORK) are all
turn-off, release the key, 4 lights flash as 0.5Hz frequency, and then 4 lights back
to normal state, that means the factory setting was restored, and the factory
setting was restored successfully.
[2]: Bind button, For bind the air module and ground module.
Press the button more than 5 seconds, 4 lights (HDMI, LINK, OSD, WORK) are all
turn-off, then 4 lights flash one by one, when the LED light works well that means
they are well bind.
[3]: Work light, For monitor the ground module operating status.
[4]: Link light, For monitor the status of connect with the air module.
Light status
Description
Operation
Flash regularly
The ground module works well.
NA
Other status
The ground module does not work.
Connect the system to the power
again, or contact with the customer
service.
Light status
Description
Operation
Turn-on
NA
Turn-off
The wireless module is not connected
to the air module.
1. Please wait for connecting;
2. Make sure the ground module is
connected the power;
3. Bind the air module and
ground module again;
4. Connect the power again.
The wireless module is connected to
the air module.