Step 1: Tail Wing Installation
1. Taking the aircraft tail wing and
the tail pipe with the accessories
bag which contains wooden parts
out from the box. The opening
and holes for tail wings have been
pre-opened. Please ensure the
angles of the wings in straight.
The angle can be fixed by slightly
trimming the opening if the angle
is not in perfect condition.
2. Glue the horizontal tail wing mount with AB adhesive bonding on the horizontal tail,
horizontal tail wing mount upright plate to be inserted into the tail pipe opening and
glued with right amount of AB adhesive.
3. Using cutter to remove the covering around the mounting
slot. It is better to remove covering slightly bigger than the slot.
Then glue the wing to the tail pipe and wing mount. There is a
little wooden tool which can help installing the wing in perfect
angle.