PLATFORM
WALL MOUNTED & FLOOR MOUNTED UNITS
Please retain for future use
Customer Services: R2, Brassmill Lane Trading Estate, Bath, BA1 3JF
Tel:01225 303 900 | Fax: 01225 448 877
Email: [email protected] | Web: www.r2bathrooms.co.uk
PAGE 2 OF 4
R2- REV : FS/07/2019
To secure the floor mounted units to the wall use the provided kit to screw the unit through the back top brace.
FIXING TO THE WALL - FLOOR MOUNTED UNITS
1
FIXING TO THE WALL - WALL MOUNTED UNITS
2
Mark the location of each of the wall
mounting plates ensuring that they are
positioned inside the sidewalls of the
unit. For each mounting plate drill two
holes in the marked positions using a
8mm drill bit to a depth of 55mm.
Remove the cover cap from the
hangers.
Locate the hangers onto the wall
mounting plates. Wall hangers tighten
the unit against the wall (Screw A) and
have up/down adjustment to level the
unit (Screw B). Replace cover cap
height
1
1
3
2
B
A
REMOVING DRAWER
The drawer and drawer fascia can be removed if necessary using the mechanism under the interior cover caps. When replacing the
drawer, ensure that the runners fully engage at the back of the drawer and an audible click is heard.
CLICK
CLICK
