To adjust the door hinges use a screwdriver as below:
05/18 .V1
Hinge adjustment
Back to wall Installation
Installation
Page 2 of 2
1
2
3
4
5
6
3
Door
Furniture Frame
2
1
Please note that these instructions are a guide only and may not be appropriate for all installations. Fit WC according to
manufacturer’s instructions.
1. Remove the top fascia by and gently pulling towards you, releasing fascia from clips.
2. Remove main access panel by simply sliding upwards.
3. Cut suitable hole for soil pipe on main access panel and hole for cistern button on top fascia.*
4. Fit unit in required location ensuring correct position of supply and waste pipes using fixings supplied.
5. Install WC and silicone the joint between WC and access panel. Install to normal building regulations.
6. Fit cistern and flush button/ plate into unit and top fascia. Apply fascia using reverse instruction from Stage 1.
*DO NOT cut a mouse hole as this will weaken the units construction.
2
2
1
3
3
1
