36
/ 42
User Manual
Rev. 2.0 - 02/09/18
TEX30LCD/S
ELETTRONICA
8.4.2 How to replace the RF module
• Open the top cover of
TEX30LCD/S
by unscrewing all the screws.
• Identify the RF module to be replaced.
• Unscrew all the points
A
with the help of an Allen screwdriver.
A
• Unscrew the RF connector
B
and disconnect the connector
C
.
c
B
• Remove the RF module and replace it with a new spare part.
• Redo all previously steps, performed in reverse, in order to reassemble and fix
the module in place.
• Put the cover back on and tighten all the screws necessary to close it.
8.4.3 How to replace the main board
• Open the top cover of
TEX30LCD/S
by unscrewing all the screws.
• Identify the module to be replaced.
• Unscrew the seven screws
A
on the rear panel of the
TEX30LCD/S
.