Radio Modem Box
9 / 29
User Manual
Rev. 1.0 - 24/06/04
5. Quick Guide - Installation and Use
This section provides a sketchy overview of machine installation procedure. If in doubt,
especially when using the machine for the first time, read the whole manual carefully.
5.1 Preparation
Unpack Radio Modem Box and immediately inspect the device for transport damage.
Pay special attention to all connectors and controls on the front and rear panels and
ensure they are not damaged.
Connect Radio Modem Box according to one of the configurations described in
Section 4.
If you wish to change the type of amplifier connected, or if amplifier type was not
specified on order, please refer to table 5.1 for dipswitch SW1 setting (see Main
Card wiring diagram).
6:
3-0&
3-0GLJPHWHU
3-0&
+&GLJPHWHU
3-&
3-0DQD0HWHU
+&DQD0HWHU
3-0
3-0
2))
21
21
2))
21
21
21
2))
2))
21
2))
2))
21
21
2))
2))
2))
21
21
21
2))
2))
2))
21
Table 5.1
The SIM card to be inserted into Radio Modem Box must be registered for "Data &
Fax Service" (see facsimile contract shown in fig. 5.1).
SIM card configuration for DATA/FAX reception must meet the following specifications:
- Asynchronous;
- Transparent;
- 300-9600 Baud.
Maximum connection speed is 9600 baud for transmission over GSM phone line.
