RSP-APE-030M
User’s Manual
R-tron., Inc. 9/15 page
4.4 Installation Information-2
The installation of the repeater depends on the types of support, location, and the demand of
the carrier.
Figure 4.1 Antenna & Repeater Installation
4.4.1 General Condition
- Check whether the repeater status is correctly horizontal angle.
- Check whether there is enough space for maintenance and repair.
4.4.2 Installing Band set
- Repeater main box should be installed 8.2 inches at least, above from the ground.
- When you install the repeater main box, do not impact on its installation to other repeaters
maintenance.
- Safety plate should be installed 8.2 inches at least, above from the ground.
4.4.3
Precautions
- Never mount the donor or coverage antenna near a window, where Signal can easily pass through the
glass
- Mount the donor antenna as high as physically possible to the exterior of the building, maximizing
the vertical separation between antennas and pointing away from the building, toward the base station
site.
- Install the antennas taking advantage of any existing building structure Such as brick walls, metal
roofs, or multiple wall structures to additionally attenuate the path between them.
- When using directional antennas inside the building to cover Corridors and hallways, point the
interior antenna away from The donor antenna location .
- In extreme cases, the building configuration may not allow for Such separation and isolation. If
additional isolation is required, Coaxial attenuation may be inserted between the donor antenna and the
repeater , with the potential compromise to the coverage within the building
