be left on for prolonged periods of time.
abrasive cloth when turned off. Never use cleaning agents
tact with the electrical
ery hot or very cold items against or in close
Operating Instructions
Electrical Safety Instructions
All fittings must be installed by a competent person, in accordance with current IEE wiring regulations. If in doubt please
consult a qualified electrician.
Safety, Care and Cleaning
DO NOT strike glass components with hard or pointed items. DO NOT place v
proximity to glass surfaces unless an adequately thick insulation material is used to prevent such items coming in contact
with the glass.
The nominal thickness of the mirror glass used in this product is 5mm. If the glass becomes chipped or broken replace
immediately.
This product should not be positioned near curtains and/or other fabrics. Never cover the mirror. This product maybe
become heated, we recommend that it is turned off after use and should never
It is recommended that the unit is cleaned with a soft, dry, non
or abrasive materials on any type of surface finish. Do not allow moisture to come into con
components.
Customer Care:
Fur further information please call:
+353 (0) 1 450 4307
Unit 2 Bluebell Industrial Estate, Dublin 12
Tel: 01 450 4307 Email:
www.rtlarge.ie
Lighting is turned on/off using the IR motion sensor switch on the lower right of the mirror, to operate, cover the
sensor zone by moving your finger over it, please note there is 10~15cm distance required from the sensor to the
wall in order to make it work.
