ASSEMBLING YOUR BUOY (Cont.)
Page 2
STEP 3
Locate the protective cover on top of the solar generator. Under the protective cover,
(REMOVE THIS BEFORE USE), is a magnet; using a Phillips screw driver, remove the two
small screws and the protective cover to expose the magnet. Touch your screwdriver to
the magnet and pull the magnet out to remove it. This operation will activate the
batteries for charging and normal operation. You may dispose of the magnet and
protective cover.
CONGRATULATIONS! NOW YOU CAN LIGHT UP THE LAKE!
YOUR AQUA LANTERN IS READY FOR USE.
STEP 4
Use proper hardware and tethering equipment for
safe anchoring of your Aqua Lantern.
ATTENTION: Anchoring hardware and equipment
are not included.
