_______________________________________________________TCA 9000 Series User Manual
14
Read Data
Select the speed used when the Master drive reads data tracks.
Read Audio
Select the speed used when the Master drive reads audio tracks.
Write
Select the speed used when the writing (recording / burning).
NOTE:
Make sure the Disc media being used is rated for the speed being
used. For instance if writing DVDs at 16X, ensure the media is
rated for 16X write. Global DiscWare cannot guarantee that all
recorders will record all media brands at their maximum rated
speed. If the recorder firmware is not optimized for this specific
brand of media, slower recording speeds may be automatically
selected by the recorder’s own firmware in order to make the best
possible quality recording.
Password Menu
The TCA series copiers allow access to be restricted by passwords. A
different password can also be set for general use (Operator Password),
and for system setup (Setup Password). The passwords operate
independently of each other, so it is possible, for instance, to have a
password required for setup, but no password required for Operator use. It
is also possible to have a single Operator Password to give access to the
whole machine, without additional password requirements for the Setup
Menu. Passwords are optional. May users never need to use passwords.
Each password must be setup separately. By default, no password is
active, and the machine can be used without passwords. To enable a
password, choose either.
Operator Password
or
Setup Password
from the
Setup Menu
then select
Enable
Password
.
The system will request a default password. This is a password that is fixed
within every machine – and cannot be changed. The default password is
YES ENTER YES ENTER YES ENTER
. The reason for a default password
is to prevent passwords being enabled accidentally.
