Version 24.09.2019
HW CANM(V98)/(V34)
RL4-UCON8-CP
P
a
g
e
13
2.5.
Connection – 10pin Power / CAN cable
Connect the enclosed 10pin Power / CAN cable’s female10pin connector to the male 10pin
connector of the video interface.
Connect the single grey wire
„CAN LOW“
of the 4 cables to the vehicle’s CAN low wire and
isolate the connection (Pins – see diagram).
Connect the single blue wire
„CAN HIGH“
of the 4 cables to the vehicle’s CAN high wire and
isolate the connection (Pins – see diagram).
Connect the single red wire to stabile
+12V terminal 30
.
Connect the single brown cable to the vehicle’s negative
Ground
.
