Version 09.12.2020
HW: CAM(V100)/(V11+V41)
ab Serien Nr: NZ20NOV694
RL4-SY3-R5
P
a
g
e
11
2.4.
Connection
–
PNP Power / CAN cable
2.4.1.
Sync3 light-version
Connect the enclosed PNP Power / CAN cable’s female10pin
connector to the male
10pin connector of the video interface.
Disconnect the female 32pin connector of the vehicle harness at the rear side of the
head-unit and connect it to the male 32pin connector of the enclosed PNP
Power/CAN cable.
Connect the
enclosed PNP Power / CAN cable’
s opposite female 32pin connector to
the previously become free male 32pin connector of the head-unit.