35
EN
I
ndustrial blender
Before removing the graduated blender jug (3) from the motor
base (1) always move the switch (8) on “0” and wait for the blades
to stop.
When removing the graduated blender jug (3) from the motor base (1),
the appliance stops (the safety switch activates).
Do not let the appliance work by manipulating the safety switch
(9 and 10).
•
To remove food residues from the glass (3) sides or to reprocess the foods themselves ...
.... move the start switch back on “0”
....
wait for the blades to stop
.... use appropriate tools ONLY.
☞
DO NOT use fingers.
Advices
•
The processing degree depends on the functioning time.
•
To obtain an optima outcome proceed by cycles and remove, if necessary, food from the
glass sides taking it towards the middle with the help of a spatula.
•
To better amalgamate ingredients to use the “PULSE” (pulses) function is advised. The
blades will rotate at maximum speed.
Use the “
PULSE
” function only for short periods (maximum 20/30 sec-
onds) and/or for operations which need continuous checks during food
processing.
•
Add a few ingredients at a time to the graduated blender jug to ease the correct pro-
cessing and avoid that an excessive quantity creates annoying foods leakages through
the cover.
NEVER
fill the glass (3) over the 1750 ml capacity; the blades action
determines an increase in the processed foods volume.
•
It is recommended to insert liquid foods in the graduated blender jug (3) before solid
ones.
Liquid foods presence ease and speeds up the processing even at a lower speed.
•
Work for a few seconds (from 5 to 30) and check the processing consistency; proceed
with the processing until reaching the desired result.
K
Summary of Contents for INDUSTRIAL BLENDER
Page 2: ......
