57
EN
MICR
O
W
A
VE O
VEN
14. OPTIONS mode
This mode is used to set various options regarding oven operation. To access the various
settings:
a. Open the door.
b. Hold down the button
2
for 5 seconds, a beep confirms access to programming mode;
OP:-- --
appears on the display.
c. Press the number button corresponding to the option to be set one or more times (see
table “B”).
Example: if you want to eliminate the “beep” each time a button is pressed, when the
display shows
OP: -- --
:
a. Press the button
3
(option OP:31 will appear).
b. Press the button
3
again (option OP:30 will appear).
c. Press
Start
to confirm,
OP: -- --
will again appear on the display.
d. After saving, press
Start
button to return to
DOOR OPEN
mode or close the
door to return to the
READY
mode.
e. If you don’t press the
Start
button, the selction of the option is not saved.
15. Service mode
For FD1834 - FD2134 models:
a. Open the door.
b. Hold down the button
3
for 5 seconds, a beep confirms access to the mode and
SERVICE
will appear on the display.
c. Press the button
1
to view the total operating hours of the magnetron (s).
d. Press the button
2
to view the total number of complete cycles performed.
e. Press the button
3
to view the total number the door was opened/closed.
f. Press the button
4
to reset the count.
4--CLEAR
will appear on the display. Press the
button to clear all the values;
CLEARED
will appear on the display. From this moment, the
value count will restart from zero (see the sections above this paragraph).
g. If after pressing the button
4
you do not want to reset the counts, press the button
Stop/Reset
. The oven will return to
DOOR OPEN
mode.
For FD1025 NEW model:
a. Open the door.
b. Hold down the button
3
for 5 seconds, a beep confirms access to the mode and
SErU
will appear on the display.
c. To check the times of door closing or opening, just press number button
1
, LED will
display the times.
d. Press
Start
and then press number button
4
in 3 seconds, the message will be
cancelled.
4-CL
displays.
e. Press
Stop/Reset
to enter
DOOR OPEN
Mode. Closing the door will make the appliance
enter
READY
Mode.
Summary of Contents for FD1025 NEW
Page 2: ......
