4
2
2.Install rear wheel assembly: install
wheel axle through wheel holder,
cushion,wheel,cushion like arrow,
then install wheel pin and wheel
cover.Then repeat for the other
wheel.
4.Install front wheel : insert the front
wheel axle to the front wheel seat , hear
the "click" sound that is installed in place.
Press down the button and pull out the
front wheel to remove the front wheel.
1.Safety belt and cross belt use:
Buckle: insert the plug into the socket in the direction of the arrow until it is locked.
Open: press the button to open.
Shorten:Lengthen the top band, and then lengthen the tail band, locking.
Length: stretch the top band, and then shorten the tail band, locking.
3.Install rear wheel : insert rear
frame to wheel holder opening,until
you hear “clicks”; Then repeat for
the other side.
2.Backrest adjustment:Tighten the belt
with one hand and press the button.
Slight back & forth to adjust the back rest
at will.
3.Leg rest adjustment:Press leg rest
adjustment button as shown in picture 3
,pull or push to adjust.
4.Canopy:Push sun canopy as
picture 4 ( forward & backward) to
keep it open & closed.
5.Front Armrest: Press armrest button
and pull as picture 5 to disassemble it.
6.Front Wheel Orientation : Press the
front wheel directional parts, the front
wheel can be oriented. Lift up the
directional parts,the stroller can be
free direction.
7.Brake: Step down brake pedal to
stop stroller .Brake pedal must be
pushed down position when stroller
is not in use.
wheel axle
front wheel
axle
button
button
buckle
open
top band
tail band
wheel holder
wheel
wheel cover
rear frame
button
button
wheel holder opening
wheel pin
3
USE
3
4
1
Brake pedal
2
3
4
5
front wheel
seat
6
7
armrest button
Directional
part
