R for Rabbit Jumping Jack, Manual, Page: 5 / 12

2
14
.Always make sure that any straps holding the seat
restraint to the vehicle shall be
tight , any straps restraining
the child should be adjusted to the child’s body, and checkthat
the straps shall not be twisted.
15
.Ensuring that any lap straps is worn low down , so that
the pelvis is firmly engaged,
shall be stressed.
16
.The seat device should be changed when it has been
subject to violent
stresses in an accident.
17
.Do not use any load bearing contact points other than
those described in the
instructions and marked in the child
restraint.
18
.Store this child seat in a safe place when it is not being
used. Avoid placing heavy
objects on top of it. Do not allow your
child seat to come into contact with corrosivesubstances e.g.
battary acid.
19
.The child restraint must not be used without the cover.
The seat cover should not be
replaced with any other than the
one recommended by the manufacturer, because thecover
constitutes an integral part of the restraint performance.
12
.Periodically inspect the harness for wear , paying
particular attention to attachment
points. stitching and
adjusting devices.
13
.The rigid items and plastic parts of a child restraint
must be so located and installed
that they are not liable ,
during everyday use of the vehicle to become trapped by a
Movable seat or in a door of the vehicle.
WARNING
WARNING
!