and front wheel brake system
c
anopy downwards from both side to open and on
c
ontrary to close canopy .
into the
handle
firmly.
brake
①
3
②
2
.
Canopy
installation
3
.
Dining
plate
installation
1
.
Open
the
stroller
①
see the picture aboved and press plastic parts of
①
See the picture aboved and insert the interface part
hole firmly on both the sides to fit dining plate.
②
Press the bottom switch to put out the dining
plate
.
4
.
Rear
wheel
installation
①
As shown in picture above,put the front wheel shaft in the part
coming out from footrest. The clip pin will be locked.
②
Press the clip pin to remove the front wheel apart.
5
.
Front
wheel
installation
6
.
Beverrage
cup
installation
Dining
interface
Rear
wheel
tube
Rear
wheel
basics
Brake
Front
wheel
shaft
Front
wheel
joint
Footrest
①
As shown in picture above,put the front wheel
shaft in the part coming out from footrest.The
clip pin will be locked.
.
②
Press the clip pin in to remove the front wheel
apart
.
①
As show in picture above,set the cup on
②
Put the brakes on the front wheel to stop stroller
when used with reversible handle .
②
See the picture above and make sure that the hands
locked in the plastic part firmly
.
-
pike
③
Press button.
was
①
See the picture above and as shown in arrow 1 Take off
from the stroller first, then replicate with another lock as arrow 2.