R for Rabbit CHERRY BERRY, Manual, Page: 3 / 4

How to Assemble Cherry Berry – The Convertible High Chair
1. Assemble the Table

Turn the table over and install all the four table legs one by one,
refer the figure above to install it correctly.

Keep pushing the table leg inside the socket till you hear an
audible click. Make sure every snap hook on the steel tube is popping
out of the holes in the table base.

Insert the foot cap of the table. Adjust the angle of the foot cap to
balance it well on the floor.
2. Assemble the Chair

Insert the chair legs in the chair bottom.

There are two chair legs marked with ‘A’, install them in the holes
marked ‘A’. Push the chair legs in the hole till you hear and audible
click. Check for the snap hook on the steel tube, it should pop out
from the holes overlapped by steel tube. Pull and check to ensure it is
installed correctly.
3. Install the chair top
Push down the chair top on the chair bottom till you hear an audible click.
Pull on the chair top to make sure it is installed securely.
Insert the safety belt in the holes given on the chair.
Connect the chair with the table to make a high chair:
Place the table assembly so that the side with R for Rabbit logo is facing towards the
front. Then insert the chair legs of the assembled chair in the holes provided on the
table.