© Copyright Qvis ®. All documentation rights reserved.
21
7.
Wait about 5 seconds for the antenna alignment to start and perform an
alignment every second.
8.
Fix the local antenna and adjust the remote antenna elevation and horizontal
direction. During the adjustment, observe “
Current RSSI
” and “
Signal Strength
”
in local bridge. The value will refresh every second. Keep fixing the remote
antenna until you are satisfied. Usually, an RSSI between -50 to -70dBm
indicates good signal strength.
9.
Adjust the local antenna after fixing the remote one. During the adjustment,
observe “
Current RSSI
” and “
Signal Strength
” in the remote bridge. Fix the
local antenna in to place when you are satisfied with the signal strength.
Under
MASTER/SLAVE mode where Antenna Alignment Tool is not available, another
option is provided to check the signal strength towards the connecting
MASTER/SLAVE. Open “
Connections
” in “
Status
” as below, and click
“
Refresh
” to view the current signal strength of the wireless connectivity. If the
signal is not so good, align the antenna manually once again.
