2. RECORDER’S REAR PANEL CONNECTIONS
3. CONNECTING TO THE INTERNET
Before continuing - please make sure that your recorder is setup as shown in parts 1 & 2 of this guide
SUCCESS! You
have now fully
connected up
you Qvis CCTV
system.
Recorder
Modem/Router
Connect the Ethernet cable into the ‘Network’ port on the rear of the recorder, then connect the other end into one of the spare ports on
your modem-router, as shown below. This will mean you can set up remote viewing via our app.
More detailed instructions on how to operate your
DVR are included in the Main User Manual, which is
on the CD-ROM disc included.
We refrain from printing these large manuals in an
effort to limit our impact on the environment.
STILL NEED HELP?
Then speak to our engaging technical team via our
webchat service found upon our website:
www.qvisglobal.com
Look for this webchat
bubble on our website
to connect to one of
our technical team
members.
© Copyright QVIS ®. All documentation rights reserved.
QUATTRO-CONNECTION
Before continuing - please make sure you have read and have completed the connection setup shown in part 1 to this guide
1
2
3
4
5 6
7
1
2
3
4
5
6
9
8
7
Audio Inputs - RCA
(not available on 4/8 channel devices)
Alarm Inputs
(not available on 4/8 channel devices)
Camera inputs - BNC
VGA - Display to monitor output
HDMI - Display to monitor output
2 x USB ports (mouse or backup)
Network port (Internet)
RS485 - PTZ camera inputs
Ethernet Cable
8
9
10
11
Audio Inputs - RCA
Audio output - RCA
DC 12Volt power supply port
10
11
