© Copyright Qvis ®. All documentation rights reserved.
7
Figure 3-2
Step 4:
Connect the device’s video output port to the DVR device. Then connect the power cable to the device.
Now you have completed the device installation and cable connection. You can use the terminal encoding
device to monitor the video footage produced by the camera.
3.2 HDCVI-EYE1 (Mini Dome Camera)
The dome camera is suited to a ceiling location installation. But it can also be installed onto a wall or other
flat surfaces if required.
Step1
Please take the installation position map in the accessories bag, and then paste it on the ceiling or the wall
according to your monitoring area requirements. Draw and then drill three holes into the installation surface
and then insert three expansion bolts into the holes. Secure these three bolts firmly.
Step 2
Turn the decoration ring counter clockwise to remove it. Please drill a “cable exit hole” in the surface
according to the installation position map, if you want to draw out the cable from the top of the installation
surface. You need to draw out the cable from the cable channel side port on the pedestal if you want to
lead it away from the camera. Adjust the device’s installation pedestal to the proper position and then draw
the cable through the cable exit. Line up the three screw holes in the device pedestal to the three plastic
expansion bolt holes in the installation position. Put the three self-tapping screws in the three plastic
expansion bolts firmly. Now the dome camera is secure in the installation surface. See Figure 3-3
.
