© Copyright Qvis® All documentation rights reserved
.
3
2. SPECIFICATIONS
Power adaptor:
12V, 500mA
Working Current
240mA
Standby Current
20mA
Wireless receiving frequency
315MHz
Wireless distance
100m (no obstacle)
Siren volume
110Db
Working condition
-10
℃
~+40
℃
Humidity
≤90%
3. WIRELESS SETUP
This section will explain how to code the wireless transmitter/ wireless
detectors with the flash siren.
Note:
We have coded the transmitter with the siren already before delivery, so
there is no need to recode before use.
If you use it as spot alarm, and want to add more wireless detectors, please
code as follows:
1. Connect the control panel to AC Adaptor and the siren will sound a beep.
This confirms connection is successful.
2. There is a small black shaft on the left side of control panel. Press the
black shaft, which will produce a long beep; the process of code
checking is now ready. Then trigger the accessory detectors for coding
to this unit.
3. Please press the black shaft again to exit
How to delete all coded information:
If you need to delete coded information or accessories, just press the black
shaft for two seconds. A long beep confirms successful deletion.
