© Copyright Qvis ®. All documentation rights reserved.
13
3
Device Installation
Important: The installation wall shall min sustain 3X weight of the bracket and camera.
Please follow the steps listed below to install the device. Please refer to Figure 3-1 and Figure 3-2 for
reference.
Step 1
Paste the installation map on to the surface of the wall or the ceiling.
Step 2
Dig the installation holes according to the installation map.
Figure 3-1
Step 3:
Open the accessories bag and then take the expansion bolts out. Insert the expansion bolts into the
installation holes.
Step 4:
Take the screws from the accessories bag and then use them to secure the device on to the installation
surface of the wall or the ceiling. The sun shield of the device can move forward or backward. Please
secure the set screw of the sun shield after you fixed the device to surface..
Step 5:
Connect the corresponding cables.
