
© Copyright Qvis ®. All documentation rights reserved.
5
3
Installation
IMPORTANT: Before the installation, please make sure the installation surface can sustain at least
3X weight of the bracket and the camera.
3.1
Device Installation
Please follow the steps listed below to install the device. Please refer to Figure 3-1 for reference.
STEP 1:
Place installation sticker onto installation surface (wall or ceiling).
STEP 2:
Drill a hole according to instruction on installation sticker.
STEP 3:
Open accessories bag, take out expansion bolt, and nail it into the hole you have drilled.
STEP 4:
Open accessories bag, take out screws. Use this screws to fix the device onto the
installation surface (wall or ceiling). Device sunshield can be moved either forward or
backward. Tighten screw on sunshield after you have fixed the device into place.
STEP 5:
Connect device’s external wiring.
Figure 3-1 Device installation illustration