© Copyright Qvis ®. All documentation rights reserved.
13
3.4
Bracket Adjustment
You can use an inner hex screw to control the bracket. Please use the inner hex wrench from the
installation accessories bag to unfasten the screw. Please refer to Figure 3-4 according to the actual
product. The horizontal angle of the rear cover can rotate 360°, the tilt angle can rotate 90° and the chassis
can rotate 360°.
Please use the inner hex wrench to firmly secure the M4 inner hex screw and the three M4 inner hex flat
tight screws on bracket cover after you complete the setup.
Important: Please make sure the M4 inner hex screw or M4 inner hex flat tight screws are firm,
otherwise it may result in chassis vibration and the camera will not be able to fix to a specified
angle.
Figure 3-4 Bracket adjustment 1
