QVI Cobra DRS-300, User Manual

Page: 7 / 100

Section 4, Swapping Sensors, provides instructions on how to remove and
replace sensors.
Section 5, Adjusting the Mounting Pad, describes how to rotationally and
vertically adjust the sensor mounting pad.
Section 6, Troubleshooting, is brief guide to troubleshooting system problems.
Appendix A, Setting Display Properties, describes how to adjust the display
properties on your system for optimum performance with Scan-X.
Appendix B, Focusing and Aligning the Camera, describes how to focus and
align the video camera (if equipped) on your Cobra.
Who Should Read This Manual?
Read and familiarize yourself with this manual if you will be involved in the
installation and/or operation of your Cobra.
Related Publications
In addition to this manual, QVI may provide the following documentation
related to Cobra:
•
Cobra Certification Reference Guide (P/N 790281). This manual contains
instructions for verifying the measurement accuracy of your Cobra system.
•
Scan-X Reference Guide (P/N 790338). This manual provides an in-depth
description of the Scan-X software. It describes the user interface and
provides instructions on how to use the numerous functions available in
Scan-X.
•
AutoScan Users Guide (P/N 790336). This manual is designed for the
advanced user and describes how to use AutoScan and/or Scan-X to
automate your Cobra system. It contains a pair of tutorials and includes the
AutoScan Public Class References and Scan-X Public Interface References.
ii About This Guide