Quuppa LD-7L, Installation Manual & Safety Information, Page: 7 / 12

● When installing Quuppa LD­7L, make sure the installation surface can safely
carry the weight of the equipment and possible wind loads.
● Your service technician or dealer may be able to provide you with information on
alternatives for mounting the equipment suitably in different types of
environments.
● Do not smoke when installing the equipment. Make sure there is no source of fire
or flame nearby.
● Make sure cables are placed so that they will not be subject to mechanical wear
and tear.
Installation notes
Quuppa LD­7L should be mounted clear of any metal obstructions
(such air­conditioning ducts, large ceiling trusses, building
superstructures) to the side or front of the enclosure. In case needed,
use a rigid conduit to lower the Quuppa LD­7L away from these
obstructions.
Quuppa LD­7L should be aimed into the intended coverage area,
therefore mount the device so that the desired mechanical tilt can be
achieved.
Selecting compatible mounting bracket
The mounting holes of Quuppa LD­7L are arranged according to VESA
MIS­F, 200, Y, 6 standard (Four M6 threaded holes in 200x200mm
pattern). Select your mounting bracket according to the requirements
set by the installation environment. Make sure that the mounting bracket
can carry the weight of Quuppa LD­7L and possible wind loads.
7 Quuppa LD­7L Installation Guide and Safety Information © 2014 Quuppa