11
3 Before you start
3.1 Setting up
Place the cash register on a stable or even surface. Use it only within the operating temperature range (see
technical data) and protect it from splashes and high humidity.
The cash register comes with an external power supply. First, please check if the specifications printed on
the label fit your local voltage. If so, connect the power pack to. The power plug is at the rear next to the
interfaces. Now connect the power supply with the power circuit and turn on the QMP 50 series with the
main switch.
The cash register will now load the operating system and automatically launch the cash register program.
You may immediately start working with your new system.
3.2 Installing a paper roll
1.
Open the printer cover.
2.
Press the Easyload lever and fold the Easyloadcover up.
3.
Insert the paper roll as shown below.
4.
If you use a paper journal (2x 38 mm) please turn the paper of the journal a few times around the paper
winding wheel.
5.
Close Easyloadcover
6.
Close the printer cover
