Quooker Swap, Replacement Instruction

Page: 2 / 8

1
3
2
4
Prepare for transport
Use the supplied plug to seal the inlet
hose from the Tank so that it cannot
leak during transport. Screw the plug
onto the hose.
Replacing the PRO3 Tank
1. Switch off the tank with the Q-shaped button on the top. Do not unplug it or switch off
the power yet.
- Run the boiling water and leave it running until the water runs cold. Also run the cold water tap.
2. Close the main shut-off valve or stopcock. Run the boiling-water tap. If it is depressurised,
no water will flow out of it.
3. Unplug the tank and disconnect the LED cable from the back of the tank cover.
Disconnect the flexible hose between the tap and the tank using spanners 10 and 14.
Disconnect the hose from the inlet combination valve using spanner 24. Remove the tank from
the kitchen cabinet.
4. Place the new tank. Connect the tap hose to the tank with the small washer using spanners
10 and 14.
en
10
14
Off