1
3
4
HO
T
CO
LD
2
B
1 Fitting tap
Push the supplied inlet hoses through
the black plastic insert and connect
the hoses to the base of the mixer
tap. Push the hoses through the hole
in the work top.
2 Securing tap
Position the brass fixing plate around
the hoses. Screw the fixing nut onto
the tap thread. Adjust the position of
the tap to ensure that the Quooker logo
is facing the user. When the handle is
in the cold position, it will be parallel
to the edge of the work top. Tighten
the fixing nut with a pipe wrench,
socket wrench or spanner.
3 Fitting to thin work top
When fitting to a thin work top, use
the white tap support.
4 Connect hoses
Insert the inlet hose screens and connect
the hot and cold water inlet hoses to
the hot and cold water supply.
Fitting tap
•
When fitting the tap into an existing 32 mm hole, use the black rubber washer instead
of the plastic insert.
