1
3
2
4
1. Connecting tank
Put the Quooker tank into position and
connect the hoses. The hoses have
compression fittings and therefore do not
need any gaskets. Connect the tap hose
with the washer to the fitting on the top of
the tank.
2. Electrical connection
Connect the boiling-water tap by plugging
the LED cable into the hole provided at
the back of the tank cover. Connect the
tank to the socket. Switch the socket on
but not the tank yet.
3. Filling tank
Open the boiling-water tap and the stop
valve on the inlet combination. Check
for leaks. Flush the tank through until the
water is clear. Black water will flow out
initially. This is Norit carbon from the filter
and completely harmless.
4. Switching on tank
Switch on the Quooker. After the water
has heated up, the entire content of the
Quooker must be flushed out once
before use.
Connecting tank
• The Quooker tank is supplied with a UK 3 pin plug and requires a standard 13 amp
earthed socket.
• If the mains lead is damaged it should be replaced by the manufacturer, their agent or a
qualified technician to prevent hazard.
• The light ring on the boiling-water tap will light up to indicate when the water is being heated
inside the tank.
• The Q-shaped button on top of the tank is the on/off switch.
E
10
14
On/off
