Quonset Microwave QM1014 User Manual Download | Manualshive

Page: 2 / 81

background image

QM1014 LO Synthesizer Distribution Unit

User Manual

Notices

© 2021-2022 Quonset Microwave

No part of this manual may be repro-
duced in any form or by any means
(including electronic storage and re-
trieval or translation into a foreign
language) without prior permission
and written consent from Quonset
Microwave as governed by United
States and international copyright
laws.

Manual Part Number

1014-001-21

Edition

Revision 1.2.1, February 2022

Printed in the USA

Quonset Microwave
315 Commerce Park Road
Unit 3
North Kingstown, RI 02852 USA

Warranty

The material contained in this docu-
ment is provided "as is," and is sub-
ject to be changed, without notice, in
future editions. Further, to the maxi-
mum extent permitted by applicable
law, Quonset Microwave disclaims
all warranties, either expressed or
implied, with regard to this man-
ual and any information contained
herein, including but not limited to the
implied warranties of merchantability
and fitness for a particular purpose.
Quonset Microwave shall not be li-
able for errors or incidental or conse-
quential damages in connection with
the furnishing, use, or performance
of this document or of any informa-
tion contained herein. Should Quon-
set Microwave and the user have a
separate written agreement with war-
ranty terms covering the material in
this document that conflict with these
terms, the warranty terms in the sep-
arate agreement shall control.

Technology Licenses

The hardware and/or software de-
scribed in this document are fur-
nished under a license and may be
used or copied only in accordance
with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights.
Software and technical data rights
granted to the federal government
include only those rights customar-
ily provided to end user customers.

Quonset Microwave provides this
customary commercial license in
Software and technical data pur-
suant to FAR 12.211 (Technical
Data) and 12.212 (Computer Soft-
ware) and, for the Department of De-
fense, DFARS 252.227-7015 (Tech-
nical Data - Commercial Items) and
DFARS 227.7202-3 (Rights in Com-
mercial Computer Software or Com-
puter Software Documentation).

Safety Notices

CAUTION

A

CAUTION

notice denotes a haz-

ard. It calls attention to an operat-
ing procedure, practice, or the like
that, if not correctly performed or ad-
hered to, could result in damage to
the product or loss of data. Do not
proceed beyond a

CAUTION

notice

until the indicated conditions are fully
understood and met.

WARNING

A WARNING notice denotes a haz-
ard. It calls attention to an oper-
ating procedure, practice, or the
likes that, if not correctly per-
formed or adhered to, could result
in personal injury or death. Do not
proceed beyond a WARNING no-
tice until the indicated conditions
are fully understood and met.

Quonset Microwave

Revision 1.2.1

i

«
1
2
3
4
...
»

Summary of Contents for QM1014


















































































Reviews:

No comments

Related manuals for QM1014

Brand: Eaton Pages: 2

Brand: LEGRAND Pages: 543

PowerStrip PS10

Brand: Samson Pages: 16

Brand: DINA Elektronik Pages: 20

Brand: Fujitsu Pages: 2

Brand: Metek Pages: 33

Brand: StarTech.com Pages: 2

Brand: TOWA Pages: 552

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands