2of2
Socket
Bulb (not
included)
Exterior
Grade Caulk
Backplate
Exterior
Grade
Caulk
WWD8409IB
FINISH: IMPERIAL BRONZE
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/4
"
Fixture can
only be
mounted in
the direction
indicated
Screw
Glass Panel Holder
Glass Panel
Cage
8"
2.5"
4.75"
18"
9.5”
9.25” SQ.
STEP 6
-
Install the Bulb and
Apply Silicone Sealer
A. Insert the bulb onto socket
and screw snugly into place.
B. Make sure the exterior wall
surface and fixture backplate
are free of dirt before applying
caulk. Using exterior grade
caulk, caulk over top of
backplate and down both
sides. Do not caulk the bottom
of the fixture backplate to
ensure proper moisture
drainage.
Your fixture is now assembled
and ready to use. Enjoy!
Figure 6
HOW TO REPLACE GLASS PANEL
A. Unscrew screws on the bottom edge of the cage and remove the
glass panel holder from the cage.
B. Replace glass panel carefully and secure with previously removed
glass panel holder and screws. Tighten screws until snug with
screwdrivers.
STEP 5
-
Install the Fixture
Body
A. Position the backplate and
Fixture Body (B) onto the
Crossbar Assembly (A).
Place the holes in the
backplate over the
mounting screws. Secure
the Fixture Body by using
the mounting balls and
hand tighten the mounting
balls until snug.
Figure 5
Mounting Ball
A
Backplate
Mounting Screw
B
2018 QuoizelInc.
ReleasedDate:2018-04-04
visit us on-line at www.quoizel.com
