2of2
STEP 6
-
Install Candle Covers and Bulbs
A. Rotate the bolt and remove it from the bolt holder to open the door.
B. Place Candle Covers (D) over sockets.
C. Insert bulbs onto sockets and screw snugly into place.
D. Close the door and place the bolt back onto the bolt holder.
2018 QuoizelInc.
ReleasedDate:2018-09-13
visit us on-line at www.quoizel.com
STEP 7
-
Apply Silicone Sealer
A. Make sure the exterior wall surface and fixture backplate are free
of dirt before applying caulk. Using exterior grade caulk, caulk over
top of backplate and down both sides. Do not caulk the bottom of
the fixture backplate to ensure proper moisture drainage.
Your fixture is now assembled and ready to use. Enjoy!
Exterior
Grade Caulk
Exterior
Grade Caulk
Backplate
Figure 5
Figure 7
Bolt Holder
Bolt
Door
Socket
D
T8 Vintage Bulb
(recommended
but not included)
STEP 4 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
STEP 5
-
Install the Fixture Body
A. Position the backplate and Fixture Body (C) onto the Crossbar
Assembly (A). Place the holes in the backplate over the mounting
screws or alternate short mounting screws. Secure the Fixture
Body by using the mounting balls and hand tighten the mounting
balls until snug.
Figure 4
Mounting Ball
A
Backplate
C
Mounting Screw
or Alternate Short
Mounting Screw
Figure 6
RO8311AC
FINISH: AGED COPPER
10.5”
12.75”
Fixture can
only be
mounted in
the direction
indicated
11.5”
5” SQ.
23.25”
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4
"
