5 of 5
visit us on-line at www.quoizel.com
Instructions for fan and light remote control.
1. Setting up the remote
The wireless control is designed to operate both the light and
speed of the fan. The
remote uses a 9V battery. Remove the
remote's back cover and insert the battery
Please make sure
the battery is inserted correctly.
The code for the controller and remote must be the same. You
can manually adjust the code as shown to the right.
2. Operating instructions
a. Turn on power and press (light) key on the remote to turn on the lights
Press the key again to turn off. Long press this button, the bulb will be dimmable.
b.(Four speed buttons) These are the four keys for adjusting fan speed
Warning
: changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
user's authority to operate the equipment.
STEP 6
Install Remote Control Transmitter Wall Bracket (If being used)
a.
Place Remote Control Mounting Bracket on the wall in desired location and
use two screws supplied to attach to the wall.
b.
Insert supplied battery in remote control in a position that is shown inside the
remote control cover.
Wall
STEP 9
How to Operate Your Ceiling Fan
a.
If airflow is desired in the opposite direction, turn the fan off and wait for the
blades to stop turning. Then slide the reverse switch on top of motor assembly
to the opposite position and turn fan on again.
Note: Push the reverse switch to Left or Right completely
Reversing
Switch
Rotation Direction
Reverse Switch Information
Season
Switch Position
Summer
Counterclockwise
Left
Winter
Clockwise
Right
ON
DIP
1
2
3
4
Remove the rubber
stopper from the
controller. Then the
code must be the
same for both
controller and remote.
Place the previously
removed rubber
stopper back in the
controller.
Batteries
6F22
9V
Antenna
AC 120V
Controller
Remote
2023
Quoizel Inc.
Released Date: 2023-01-10
