4
CARE AND MAINTENANCE
Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean
fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Bulbs will not light.
Fuse blows or the
circuit breaker trips
when light is turned
on.
1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
Crossed wires or power wire is
grounding out.
1
. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
Check wire connection.
Your installation is now complete! Restore electricity
and save this sheet for future reference.
STEP 6:
a. Place the previously removed flat washer, fixture hood,
over the stem.
b. Secure with the previously removed finial.
c. Hand-tighten until snug.
Fixture hood
Fixture body
Stem
Finial
Flat Washer
2018 QuoizelInc.
Printed in China
