2016 QuoizelInc.
5of5
RevisedDate:2016-07-07
Assembly Instruction Sheet #IS-DE8958IB
_R1
For Style DE8958IB
STEP 8
Apply Silicone Sealer to Mounting
Balls
-
A. To prevent moisture from entering the wire
compartment, apply a small amount of silicone sealer
(not included) to the threaded side of the mounting
balls (E) and then install them onto the mounting
screws (B). Wipe off excess caulk.
Figure 9
Mounting Ball
Fixture
Body
Fixture Hood
Lock Ball
Cage
Figure 8
Waterproof Washer
Bolt
STEP 7
Attach Cage to Fixture Hood
-
A. Attach the Cage back onto the Fixture Hood. Place the
Waterproof Washers over the Bolts and secure with Lock
Balls. Hand tighten until snug.
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
STEP 9
Apply Silicone Sealer to Backplate
-
A. Make sure exterior wall surface and fixture backplate
are free of dirt before applying caulk. Using exterior
grade caulk, start on one side of fixture backplate and
follow contour, where the fixture backplate meets the
exterior wall surface upward. Proceed to caulk over top
of backplate and down other side. Do not caulk bottom
of fixture backplate to ensure proper moisture
drainage.
Your lamp wall fixture is now assembled and ready to
use. Enjoy!
Exterior
Grade Caulk
Outdoor Fixture
Backplate
Exterior Wall Surface
Figure 10
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
