2of2
2017 QuoizelInc.
RevisedDate:2017-11-23
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
STEP 4
Test Fit the Backplate to the Crossbar
-
A. Thread the Hex Nut (D) to the middle of the Nipple (B). Place the
Lock Washer (C) over the Nipple (B) and then thread the Nipple (B)
into the Crossbar (A) until the Nipple (B) is about 0.375” above the
Crossbar (A).
B. Place the backplate and Fixture Body (F) over the Nipple (B) against
the wall to determine the correct position of the Nipple (B). Thread
A
B
C
D
E
F
Figure 4
STEP 5 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Figure 5
the Mounting Ball (E) onto the Nipple
(B). Adjust the Nipple (B) to allow the
backplate to rest against the wall
when held in place by the Mounting
Ball (E).
C. Remove the Mounting Ball (E) and the
Fixture Body (F). Tighten the Hex Nut
(D) against the Crossbar (A) to secure
in place.
STEP 6 - Install Fixture Body
A. Place the backplate and Fixture
Body (F) over the Nipple (B) and
secure with the Mounting Ball (E).
Hand tighten until snug.
B
E
F
Figure 6
STEP 7
-
Apply Silicone Sealer
A. Make sure the exterior wall surface and fixture backplate are free of
dirt before applying caulk. Using exterior grade caulk, caulk over
top of backplate and down both sides. Do not caulk the bottom of the
fixture backplate to ensure proper moisture drainage.
Your fixture is now assembled and ready to use. Enjoy!
Figure 7
Exterior
Grade Caulk
Backplate
Exterior
Grade Caulk
Backplate
Backplate
COR8410K
FINISH: MYSTIC BLACK
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4
"
7”
Dia.
21”
8” Dia.
10” Dia.
6”
14”
11.5”
Fixture can
only be
mounted in
the direction
indicated
