1
2
3
4
3
4
27
(3) Wind the wire tightly by turning the wing in
the seal.
(4) Break the wing off the seal.
Sealing is guaranteed by breaking the seal
off.
Sealing the device
Sealing fl ow sensors
Sealing the temperature sensor in a ball valve
(1) Thread the seal wire through the seal holes in the
union nut on the inlet and on the fl ow sensor.
(2) Insert the wire through the available opening in the seal body.
(1) Thread the wire of the seal through the seal holes on the ball valve and the
sensor screw fi tting.
(2) Insert the wire through the available opening in the seal body.
(3) Wind the wire tightly by turning the wing in the seal.
(4) Break the wing off the seal.
Sealing is guaranteed by breaking the seal off.
Summary of Contents for Qheat5
Page 11: ...101 5 G 3 4 80 78 Ø 50 64 2 11 Dimensional drawings Design length 80 mm Dimensions in mm ...
Page 12: ...12 Dimensional drawings Design length 110 mm 101 5 G 3 4 110 78 Ø 50 66 1 Dimensions in mm ...
Page 13: ...101 5 G 1 130 78 68 5 13 Dimensional drawings Design length 130 mm Dimensions in mm ...
