en
08.09.2017 / V1.0
FUM5-00MO-DES-RHMHE 19
Device replacement
Replacing the calculator unit/heat meter
Q AMR
•
Log off the calculator unit/heat meter to be replaced
from the Q-AMR network
•
Carry out device replacement
•
Log on the new calculator unit/heat meter in the
Q-AMR network (see the section “Starting installa
-
tion telegrams”)
Q walk-by
•
Carry out device replacement
•
Activate Q walk-by mode (see the section “Starting
installation telegrams”)
Replace radio add-on module
When the add-on radio module is replaced, the network node must not
be reprogrammed.
The device number transmitted is read out of the calculator unit and
transmitted to the network node by the new module as before.
Proceed as described under “Setting the radio add-on module in place”.
