AROS
|
4
AROS
|
5
NOTE
The default temperature reading on the display is degree
Fahrenheit (°F). To change the display to degree Celsius (°C),
press Temperature Increase and Temperature Decrease at the
same time and hold for 3 seconds. Repeat the process to change
back to degree Fahrenheit (°F).
DO NOT OPERATE IN FREEZING OUTDOOR CONDITIONS
This air conditioner was not designed for and should not be
used in freezing outdoor conditions.
COOL MODE
Use the Cool mode at Low, Med or High for cooling. Use the
Temperature Increase / Decrease controls to set the desired
temperature between 64°F and 86°F in 1°F increments.
An electronic thermostat is used to maintain the room
temperature. The compressor will cycle on and off to keep the
room at the set level of comfort. Set the thermostat at a lower
number and the indoor air will become cooler. Set the thermostat
at a higher number and the indoor air will become warmer.
NOTE
If aros is off and is then turned on while set to a cool
setting or if turned from a fan setting to a cool setting, it may
take approximately 3 minutes for the compressor to start and
cooling to begin.
COOLING DESCRIPTIONS:
For normal cooling
- Select the
Cool
mode and
High
or
Med
fan with a middle set temperature.
For maximum cooling
- Select the
Cool
mode
and
High
fan with a lower set temperature.
For quieter and nighttime cooling
- Select the
Cool
mode and
Low
fan with a middle set temperature.
ECO MODE
This mode optimizes the cooling power of your air conditioner,
thereby saving you energy. Once the set point temperature
has been reached, the fan will cycle off to save energy. The fan
will cycle back on periodically to ensure all cooling capacity in
the system is used. This mode is the default mode for the unit.
Each time the unit is powered off, it will restart in
Eco
mode
ON
.
The first time the unit is turned on, the settings will be 70° and
Low fan. You can adjust the fan speed and temperature to your
personal comfort.
Eco ON
helps minimize electricity use. It is normal for the fan
to cycle off and then back on in this mode. This on/off cycle
can repeat multiple times. Because the fan will cycle off,
you may notice a variation in room temperature and humidity.
Eco OFF
When this mode is not engaged, the fan will run
continuously, and in Cool mode the compressor will cycle on
and off to maintain room temperature.
FAN-ONLY MODE
Use the Fan-only mode at Low, Med or High fan speed to provide
air circulation and filtering without cooling. Since fan-only
settings do not provide cooling, a set temperature cannot be
entered. The room temperature will appear in the display.
POWER OUTAGE RECOVERY FEATURE
In the case of a power outage or interruption, the unit will
automatically restart in the settings last used after the power
is restored.
POWER
Turns air conditioner on and off. When turned on,
the display will show the room temperature
MODE
Use to set the air conditioner to Cool, Eco, or Fan-only mode
FAN SPEED
Use to set the fan speed to High, Med or Low on the unit
TEMPERATURE INCREASE / DECREASE
Use up and down arrows to set temperature
when in Cool or Eco mode
DISPLAY
Shows the room temperature. Shows the set temperature
while setting the temperature in Cool or Eco modes.
ABOUT THE CONTROLS ON THE AIR CONDITIONER
Lights will illuminate next to each option when activated
to indicate the selected settings.
OPERATING INSTRUCTIONS
ABOUT SMART TECHNOLOGY
Aros has smart features that extend its functionality. It can be
controlled from the Wink app on your mobile device and set to
gather information about your schedule, location, usage, and
more—to help automatically and efficiently maintain the perfect
temperature for your home.
For more information, download and launch the Wink app on
your mobile device then follow its instructions to connect.
