SX0011.C
23
2
SX0011.C
I T
A
E
N
G
E S P
P O
R
1.8.1.
Description
Bottom bracket
Tightening
torque
1.8.2.
Crank
35-40 N·m
1.8.3.
Pedals
25-35 N·m
1.8.4.
Rear wheel nut
30-45 N·m
1.8.5.
Front wheel nut
25-30 N·m
1.8.6.
Saddle fixation screw
18-22 N·m
1.8.7.
Leg fixation srew
18-22 N·m
1.8.8.
Articulation extension stem screw
18-22 N·m
1.8.9.
Brake fixation srew
8-10 N·m
1.8.10. Shoe brake fixation screw
6-8 N·m
1.8.11. Brake lever fixation screw
6-8 N·m
1.8.12. Handlebar fixation screw
6-8 N·m
1.8.13. Stem fixation screw
6-8 N·m
1.8.14. Steering Ahead fixation screw
6-8 N·m
1.8.15. Frame lock fixation screw
6-8 N·m
1.8.16. Towlines fixation screw
5 N·m
Note:
the tightening torque of specific components are listed on the corresponding sections of this manual (BRAKES,
TRNASMISSIONS GROUP) or in the manufacturers manuals.
2. ELECTRONIC COMPONENTS
2.1. Motor
Pay attention to the wear of all the cables and conexions in order to avoid short-circuits and possible damages in the
Motor.
Avoid the exposition of the Motor for long periods of time in situations of torrential rain.
2.2. Control Unit
Pay attention to the wear of all the cables and conexions in order to avoid short-circuits and possible damages in the
Control Unit.
Avoid direct exposition to water.
2.3. Battery
Use only the original charger given with the bicycle.
Do never connect the terminals from the battery, as there might occur a short-circuit and it can cause material and
personal injuries.
Protect the battery from hits and from falling, as it might damage.
Never place the battery under the sun or at a high temperatures above 60 °C
If the battery will not be used in a long period of time, charge it every 3 months.
Avoid the contact with wate, principally the port of charge.
2.4. Charger
Charge the battery in a place away from children.
Pay attention to the wear of the charging connector, as it might cause damages during the charging process. Avoid
overwet environments.
Never use the charger on unstable, dirty or unappropriated surfaces. Either directly under the sun.
Never use the charger under torrential rain.
Keep the room well ventilated during the charging process.
Avoid the introduction of liquid or metallic objects inside the charger.
Protect the charger from hits, drops and other possible abuses.