background image

Cardiac Stress Treadmills User Guide

Glossary  D-1 

D

Glossary

Controller

Press-button panel that lets the user control the 
treadmill and view exercise progress.

Deck

Treadmill surface under walking belt.

Grade

Incline, or slope, of the treadmill deck 
measured in percent grade.

Monitoring

System

A device that receives ECG signals from a 
patient and displays and/or records them for 
review. Used with cardiac stress treadmills for 
exercise testing.

Protocol

The specific treadmill workload sequence used 
for a particular stress test. 

Roller Guard

Metal plate at the rear of the treadmill deck, 
designed to prevent people from placing fingers 
between the walking belt and rear roller.

Stress Test

A procedure used to test cardiovascular and 
pulmonary response. Consists of a patient 
performing controlled exercise while heart and/
or lung activity is measured with precision 
instrumentation. Also called a treadmill 
exercise test or exercise tolerance test (ETT).

Track

The path that the treadmill belt follows.

Walking Belt

Walking surface of the treadmill—moves 
according to the speed set on the controller. 

Summary of Contents for TM55















































Reviews: