GB-7
If your unit does not work anymore (no test while
switching on), we advise you to complete the
following checks:
Is the power cord properly plugged in at both
ends?
Is the fuse OK?
Is the cigar lighter socket clean and free from corro-
sion?
Is the ON/OFF key (PWR) used to switch the unit
ON?
FUSE REPLACEMENT INSTRUCTIONS
Do not use any tools to change the fuse.
Press the top of the fuse holder down and rotate it
anti-clockwise approx. 30°. Lift the top straight up.
Remove the fuse and replace if required by one
of the same rating. The silver tip contains a spring
which may fly off when disassembling. The fuse
should be inserted before the spring.
Place the top of the fuse-holder back on the
body. Press down and rotate the top of the fuse
holder clockwise approx. 30°.
•
•
•
•
•
•
•
NOTE :
Failing to press the top of the fuse holder down
prior to rotating it will damage the fuse holder. Use
of pliers to rotate the top may also cause damage.
The illustration indicates the direction that the fuse
holder top must be rotated to reassemble.
•
•
xt9500.indd 7
15/07/2009 14:11:06
