User Manual
January 2005
www.quintet.ie
Page 20
Recording Chords
1. Make sure the external keyboard is connected and the Quintet is on in record
mode.
2. Refer to page 11 if you want to choose an instrument.
3. Press
Record
. The red
Record
light flashes indicating that you must select a
player.
4. Press the switch corresponding to the player you want to record on. For
example if you want to record some notes for player 2, press the player 2
switch. The red
Record
light goes steady.
5. Play the first chord on the keyboard.
6. Press the players switch again. The red
Record
light will extinguish whilst the
switch is pressed. If you only want 1 chord on this switch jump to step 9.
7. Play the next chord on the keyboard.
8. Repeat from Step 6, pressing the players switch between each chord, until
you have entered all the chords of the song.
9. Press
Record
to stop recording. The
Ready
will flash as the new music is
stored in the Quintet.
Now you can play back the recorded chords one at a time by pressing the
player’s switch.
NOTE:
The maximum number of chords you can record for a player is 10. The
minimum is 1.
