
C35 User’s Manual
Q
uintet
Digital Corporation
20
3.5.1 Stylus Calibration
You might need to recalibrate the touch screen (i.e. when you attempt to select one item
with the stylus, another item is erroneously selected).
To recalibrate the touch screen on Windows CE, complete the following steps:
1. Select Start > Settings > Control Panel > Stylus to open the Stylus Properties dialog
as shown in Figure 12.
2. Adjust Double-Tap sensitivity if needed or desired.
3. Select the Calibration tab to open the Calibration application.
4. Tap Recalibrate to open the Calibration screen shown in Figure 13.
5. Carefully press and briefly hold stylus on the center of the target. Repeat as the target
moves around the screen. Press the <ESC> key to cancel the stylus calibration.
6. Press the <ENTER> key or tap the screen to accept the new calibration settings.
7. Press the <ESC> key to keep the old settings.
8. New calibration settings are persistently saved in registry.
Figure 12 Figure 13
Startup stylus calibration on Windows CE
When starting the terminal, a stylus calibration screen comes up if valid calibration settings
are not available. This happens in the following circumstances:
1. At the first startup of the terminal.
2. After restoring registry default settings using the applet Registry Admin and performing
a warm boot.