Page 2
For technical questions, please call 1-888-866-5797.
Item 64915 64916
Specifications
Model
64915
64916
Drive Size
3/8″
1/2″
Torque Range
5-100 ft. lb.
12.5-250 ft. lb.
Batteries
2 x ‘AA’
Torque Accuracy
±3% CW, ±4% CCW
Angle Accuracy
±3° (rotating 90° at speed of 30°/sec)
IMPORTANT SAFETY INFORMATION
WARNING Read all safety warnings
and instructions.
Failure to follow the warnings and instructions
may result in injury.
Save all warnings and instructions
for future reference.
1. Wear ANSI-approved safety goggles during use.
2. Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium) batteries.
Position batteries in proper polarity.
Do not use swollen or leaking batteries.
3. Use as intended only:
a. Do not use for loosening fasteners.
b. Use only within rated torque range.
c. Do not use as hammer or pry bar.
d. Do not use handle extension to increase force.
Do not use as a breaker bar.
e. Do not use a Torque Wrench that
has been dropped. Have it tested
before putting back into use.
f. Do not expose to heat, humidity, or
direct sunlight for a long period.
g. Keep dry. If the wrench gets wet, dry
it off thoroughly as soon as possible.
Especially avoid exposure to seawater.
h. Do not use organic solvents, such as alcohol
or paint thinner to clean the wrench.
i. Keep away from magnets.
j. Do not expose to dust or sand.
k. Do not apply force to the LCD panel.
4. Have the Torque Wrench calibrated and
serviced only by a qualified technician.
5. Inspect before every use; do not use
if damaged or if parts are loose.
6. Keep away from children.
7. Use only sockets with the correct drive and rated
to at least the torque that will be applied to it.
8. The warnings, cautions, and instructions in this
instruction manual cannot cover all possible
conditions and situations that may occur. It must
be understood by the operator that common sense
and caution are factors which cannot be built into
this product, but must be supplied by the operator.
