Quincy QSV 2200, Instruction Manual

Page: 59 / 124

Section III - Airlogic Graphic controller
Quincy Vacuum Pump-QSV Series 59

Move the cursor to the Password icon (see above, section Menu icon).

Select Modify using the Scroll keys and press the Enter key. Next, modify the password as required.
3.17 Programmable settings
Vacuum pump/motor
Minimum
setting
Factory setting Maximum setting
Pressure band high 1
mbar (a) 201 300 1000
psi 2.91 4.35 14.50
Pressure band low 1
mbar (a) 150 200 1000
psi 2.17 2.9 14.50
Pressure band high 2
mbar (a) 301 400 1000
psi 4.36 5.80 14.50
Pressure band low 2
mbar (a) 150 300 1000
psi 2.17 4.35 14.50
Proportional band % 5 10 15
Integration time sec 0,5 5 10
Run at minimum pressure sec 0 30 300
Min stop time sec 5 5 30
Power recovery time sec 10 10 3600
Restart delay sec 0 0 1200
Communication time-out sec 10 30 60
Fan motor start per day 1 240 240
Service plan
The built-in service timers will give a Service warning message after their respective pre-programmed time interval
has elapsed.
For specific data, see section Preventive Maintenance.
Consult Supplier if a timer setting needs to be changed. The intervals must not exceed the nominal intervals and
must coincide logically. See section Modifying general settings.