HANGING INSTRUCTIONS
3
Note:
If your wall is not made of drywall, you will need to purchase fasteners recommended for
your type of wall from a local hardware store and install them according to the
manufacturer’s suggestions. You will still need to screw the wooden support to your wall.
Step 3
Use the screws provided to attach a wooden support to each E-Z Ancor™.
Position the wooden support such that the sharp edge is pointing toward the ceiling and
away from the wall. The side with the recessed hole is the one through which the screw is
inserted. Be sure the sharp edge is parallel with the ceiling when tightening the screw.
Copyright 2016 Quilt Display Products
●
Customer Service 937-506-0032
●
www.quiltdisplayproducts.com
